Basic structure and operation precautions of automatic polishing machine
A fully automatic polishing machine may be mentioned, most people do not know what it is and what it is used for because it is rarely used in daily life. In a nutshell, an automatic polisher smoothly polishes rough parts of a surface to achieve the desired effect. At present, with the continuous development of the economy, the use of automatic polishing machines is becoming wider and wider, and the demand for automatic polishing machines is also growing steadily. Many manufacturers have started mass production, which has also greatly improved the quality and processing technology. In the future development process, automatic polishing machine will occupy a more important position. So, how much do you know about the basic structure and operation precautions of the automatic polishing machine?
The basic structure of the automatic polishing machine consists of:
The automatic polishing machine consists of basic structures such as base, polishing plate, polishing cloth, polishing cover and cover. The motor is fixed on the base, and the taper sleeve for fixing the polishing disc is connected with the motor shaft through screws. The polishing fabric is fixed to the polishing disc with the ferrule, and the motor is activated by the switch on the base, and then the sample can be polished on the rotating polishing disc by pressing the sample by hand. The drain from the plastic pot on the seat flows into the square pot next to the automatic polisher. When the machine is not in use, the polishing cover and polishing cover can prevent dust and other debris from falling on the polishing fabric, which will affect the use effect.
Precautions for using automatic polishing machine:
1. Electrolysis is alkaline. When adding electrolytes, avoid direct contact with your hands. If you accidentally contaminate the skin and other parts, rinse immediately with water.
2. Gas pipelines should be checked frequently. If a leak is found in a gas line, it should be dealt with immediately. If any changes are found in the natural gas pipeline, it should be replaced immediately. If it is found that the water in the gas pipeline is serious, it should be drained in time.
3. The machine should be managed and operated by special personnel. Non-professionals are not allowed to disassemble the casing to avoid losses.
4. The automatic polishing machine is equipped with multiple safety protection systems, please use it with confidence.
