2022-09-03
How to automate the surface drawing and polishing of the lock panel bezel?
Generally, the door lock has only a mechanical key unlocking hole on the front panel. If it is to be disassembled, it must be removed from the rear panel of the door lock. The screws and the like will be designed on the rear panel of the door lock to prevent other
People disassemble outside. The screws on the rear panel are screwed on the front panel. Remove the back, the front can be opened.
The lock panel bezel is generally made of stainless steel. In order to be beautiful, its surface is generally brushed, and some will have a mirror effect. The brushed and mirror effects are generally post-processing.
The wire drawing can be processed by abrasive belt, sandpaper, etc., and the mirror effect can be processed by grinding and polishing with cloth wheel, hemp wheel, etc. The traditional drawing and polishing methods are manual or
It is realized by semi-automatic machines. With the gradual automation of the industry and the increase of labor costs, there have been fully automatic machines for the wire drawing and polishing of the lock panel bezel.
For the wire drawing and polishing of the lock panel baffle, our company's flat polishing machine, water grinding wire drawing machine, disc polishing machine, and semi-automatic motor polishing machine are all competent.
According to the needs of craftsmanship and output.
Flat polishing machine, water grinding wire drawing machine, disc polishing machine, semi-automatic motor polishing machine
Send your inquiry directly to us
