Automatic ss tube deburring machine is used for straight round/square tube. The tube diameter is range from 10mm to 100mm(round tube), 10*10mm-100*100mm(square tube), and the stainless steel tube must be straight. The features of our tube deburring machine are below:
- The deburring head can be designed from one head to 32 heads
- Precision grinding finishing without deformation
- Decorative Finishing (buffing, deburring, and satin finishing) can up to 15m/min with 8K mirror finishing, Common machine only can achieve 8m/min
- More than 10 years usage life and safety operation
Specification of automatic ss tube deburring machine
|automatic ss tube deburring machine
ModelJZ-P10008 Motor4KW*8 (Siemens) Voltage380V, 50/60HZ, 3Phase Spindle speed2300r/min Conveyor speed0-15m/min Width of spindle300mm Tube OD10-100mm (round tube), 10*10mm-100*100mm(square tube) Ginding heads10 heads (can be customized) ConsumablesFlap wheel, Nylon wheel, Sisal wheel, Cloth wheel, Cotton wheel ROHSEnvironment protection completely with dust cover
Details picture of automatic ss tube deburring machine
The pipe finishing after polishing
The application trend of automatic ss tube deburring machine
Manufacturing costs, timelines and right polishing finishing are always under tight scrutiny from last 20 years. because of competitive economy, those point will become key point to affect your enterprise’s development fate.For how to reduce the cost ? Please check approximately comparative date as below Echart. But that is not accurate date.
How to use consumables to get needed finish by this tube deburring machine?
Manufacturing costs, timelines and right polished finishing are always under tight scrutiny from last 20 years. Here, we can give you options at every point of polishing process that ultimately determine your success with 6 levels of polishing range from grinding to 100% 8K mirror finishing. We can use right consumables and polishing process to achieve a profitable cost and get right polished finishing as you need. Details of 6 levels as below:
- Grinding finishUsually use 60#-80# grit abrasive belt or flap wheels.
- Brushed finishUsually use 120#-180# grit abrasive belt or flap wheels.
- Sanitary finishUsually use 180#-240# grit abrasive belt or flap wheels.
- Polished finishUsually use 240#-320# grit abrasive belt or flap wheels, then use sisal wheel.
- Glossy finishUsually use 400#-600# grit abrasive belt or flap wheels, sisal wheel ,common cloth wheel
- Mirror finishUsually use 600#-800# grit abrasive belt,then use sisal wheel,hard cloth wheel,at last step use cotton wheels to get 100% 8K Mirror finishing.
More information, please contact directly by below:
Contact person: Laura xu