The principle and quality of polishing wax polishing Since the hardness of the polishing wax is required to be higher than the hardness and good resistance of the metal on the surface to be polished, otherwise grinding cannot be achieved. Polishing wax should have good heat resistance and thermal stability. During the polishing process, with the high-speed rotation and friction of the polishing wheel, the temperature of the polished surface rises sharply. If the abrasive is easily thermally decomposed, its hardness and resistance will decrease, affecting the polishing effect. It has good stability, and the polishing wax does not have any chemical reaction with the polished surface at the working temperature, otherwise the polishing wax will change with the inherent mechanical properties, which will affect the smoothness of the polished surface. The production and manufacture of polishing wax is a process of mixing materials evenly. First, all kinds of materials without moisture are weighed according to the proportion, and then the paste is put into the mixing melter for heating and melting, and the abrasive is mixed evenly. The substance is slowly put into the oil mixture paste solution that has been melted and mixed evenly, and the mixture is mixed so that it is melted, saturated and mixed evenly. , Heat and mix evenly until the surface of the wax solution is uniform and shiny, stop heating, keep stirring to make the temperature drop slowly, when the temperature drops to a suitable discharge temperature, pour the wax solution into the pre-prepared mold and cool it until the wax The surface of the solution condenses, put it in cold water to cool and demould, and put the wax into the box after drying the water. Therefore, the polishing wax must be used within the shelf life, and the expired polishing wax has no polishing effect on the product.